Tutorial: Coasters from Paper and Resin Jewelry and Upcycled Gift Bags |  Using a Drill Press

Tutorial: Coasters from Paper and Resin Jewelry and Upcycled Gift Bags | Using a Drill Press

I often want to make use of present luggage as a result of they can be utilized over and over. I all the time have a number of them at house. The paper used is calmly coated with some form of protecting movie.

I questioned if this kind of paper would work for making resin jewellery. The paper have to be protected beforehand, as contact with the resin will make it translucent. Due to this fact, utilizing present bag paper can save a step. There’s a option to discover it! Let’s strive!

The patterns on the present luggage are very numerous which implies the designs will be too. I selected some from my stash, which I believe have a up to date fashion appropriate for jewellery making.

It helps to view and lower the paper underneath the punch for any design that requires alignment.

My most popular resin is from Little Home windows Glossy Resin (Readers get 15% off utilizing this code BG1516). It is a protected resin, and I prefer it as a result of it’s totally clear for each crowning and casting. It is usually a low-ball producer. Additionally see this submit about all the things safety precautions with epoxy and uv resin.

The process is simple. Merely observe the instructions to organize the resin combine. I painted a few of the resin black utilizing resin colorant Offered by Little Home windows. I’ve it too some silver mica powder – many manufacturers out there. I fastidiously coated the backs of the paper I lower with out overflowing the sides. This shall be a lightweight dome.

I coated all the undertaking with an upcycled plastic lunch field and let the resin dry in a single day. Observe: placement round tray on a board, making it simple to securely transfer the undertaking to a different location if wanted.

I then turned the items over and added a coat of clear resin.

Observe : The resin didn’t have an effect on the protected paper. Nonetheless, you might even see some leakage behind the components the place the paper will not be protected. This didn’t have an effect on my undertaking as a result of I selected to dome the again with coloured resin.

An alternative choice is to make reversible patterns by gluing two cutouts back-to-back.


Up to now, I’ve both used a guide drill, for instance spring drill or a spring drill mixture to drill a pilot gap after which end rapidly along with your dremelim. (Others additionally use a flex shaft dremel).
This time, I lastly used drill press for my Dremel. This explicit drill press is price range pleasant. It holds the drill regular so I can use the lever to decrease the work aspect down to start out drilling.

I made this video to indicate how briskly it’s. I lowered the drill first to examine if I aligned the 1.5mm bit accurately with the mark I made. I attempted to safe the piece of resin with some masking tape however the drill bit was nonetheless wobbly when it began biting the resin. So I believe I want a greater methodology of fastening the items. Observe: I put on an N95 face masks to keep away from respiration mud whereas doing this. And I run the drill at slower speeds.

Once I select to not use holes, hypo cement for gluing both a home made bail piece or a repurposed brass discover to resin. This adhesive appears to be the most effective for resin as it is extremely sturdy and sturdy and fewer messy than the E6000 due to the small applicator head.

Listed here are the outcomes. This locket is definitely a mix of two items of resin. Just one aspect of the sq. one was domed. Some residue is glued with clear resin. Hypo cement may also be used.

One other suggestion is to mix the resin items with different steel parts like these brass ones. Brass findings are a hot trend and there are such a lot of kinds to select from nowadays.
I additionally used a zinc alloy body for the silvery design. metal frame findings these days it is usually extraordinarily widespread in every kind of knickknack design.

Discover that I made these easy necklaces in such a means that the clasps by no means transfer ahead. That is simple to do – simply separate the chains and fasten them to the bails with leap rings.


Some time in the past Fran from Little Home windows informed me metal rings Can be utilized for coasters and ornaments. He has quite a lot of nice concepts as you may see on the finish of the video.

Rings come with backing films. Besides, expertise resin tape higher heavy duty packing tape I’ve used it earlier than because it leaves no residue. Thoughts you, I exploit some alcohol from the pharmacy to take away any residue from the packing tape.

Nonetheless, for one thing as huge as these rings, solely this Little Home windows assist film I’ve for the coaster in my thoughts will work.

The inspiration got here from the monogrammed design on the duvet. I actually appreciated this one and thought the gold colour on the black present bag paper I used can be an important different to the gold letter.

After the protecting layer was peeled off, I pressed a hoop onto the backing movie. I then stuffed the bottom nearly to the highest with the black resin combination – the identical as I exploit for jewellery items.

As soon as coated and allowed to treatment in a single day, the backing movie comes off simply. It may be reused for an additional undertaking in case you fastidiously put it again in its protecting layer.

Any bits of resin within the ring – there was a small leak on one aspect in addition to on the highest – will be simply eliminated. I used the plastic mixer to push the cured resin items.

I then used my 2.5 inch paper punch to create a spherical form from the present bag I used.

I used a black constructor pencil to paint the white fringe of the lower.

I simply used a glue stick to stick the lower to the cured resin.

This retains the paper from shifting once I pour the ultimate coat of clear resin.

i used these small pointed sticks I discover it more practical than toothpicks at eradicating cussed bubbles. I additionally pressed the lower paper down to ensure there have been no bubbles beneath, as I used to be utilizing a comparatively weak adhesive to stick it.

As soon as dry, the coaster seems to be fairly fancy!

Fran is a inspirational coaster and decoration tutorial.


Earlier than you go :


This weblog might include affiliate hyperlinks. I cost a small price for all merchandise bought via affiliate hyperlinks. That is for the assist of this weblog and to offer supply info to the readers. The opinions expressed are fully my very own. They would be the similar whether or not I obtain any compensation or not.


#Tutorial #Coasters #Paper #Resin #Jewellery #Upcycled #Present #Luggage #Drill #Press


Your email address will not be published. Required fields are marked *